Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 10 - Jul 15
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Happymodel Mobula7 1S ELRS 75mm BNF Brushless Whoop (2.4Ghz)This drone features the all new 5in1 AIO board that includes 2. 4Ghz ExpressLRS V2. 0, OpenVTX (up to 400mW) along with 4x 12A BLheli_S ESC, and BetaFlight OSD all built into a F4 whoop flight controller board. The new RS0802 motors come with a new unibell design, and use a 1. 5mm shaft with a PCB bottom plate, high efficiency and much more reliable. &feature=emb_title Key Features X12 5 IN 1 AIO flight controller built in 2. 4G ELRS V3. 0 and Openvtx
This drone features the all new 5in1 AIO board that includes 2.4Ghz ExpressLRS V2.0, OpenVTX (up to 400mW) along with 4x 12A BLheli_S ESC, and BetaFlight OSD all built into a F4 whoop flight controller board.
The new RS0802 motors come with a new unibell design, and use a 1.5mm shaft with a PCB bottom plate, high efficiency and much more reliable.
&feature=emb_title
Key Features
- X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V3.0 and Openvtx
- VTX Power up to 400mw
- ELRS V3.0 Support
- NEW RS0802 KV20000 motors
- Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera
- Smooth and powerful
- Compatible for 1S Lipo/LIHV
- Recommend 1S 450mah/550mah/650mah battery(Not include)
&feature=emb_title
Specification
- Brand Name: Happymodel
- Item Name: Mobula7 1S 75mm Micro FPV whoop drone
- Wheelbase: 75mm
- Size: 99mm*99mm*40mm
- Weight: 24g
| Motor | Mode: RS0802 KV20000 Configu-ration:9N12P Stator Diamter:8mm Stator Length:2mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.*Len):Φ10.5mm*13.5mm Weight(g):2.0g No.of Cells(Lipo):1S only |
| Propellers | Weight:0.24g Material:PC Pitch:1 inch Props Dia:40mm Center Thickness:5mm Center Hole Dia:1.5mm |
| Flight controller | X12 ELRS V1.0 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280 X12 Frsky V1.0 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR X12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver Target: CRAZYBEEF4FS X12 PNP V1.0 flight controller without onboard receiver Target: CRAZYBEEF4DX MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU6000 or ICM20689(SPI connection) Mount hole size: 25.5mm*25.5mm Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 12A(each) Blheli_S 4in1 ESC Built-in Betaflight OSD(SPI Control) Built-in 5.8G OpenVTX 0mw~400mw Built-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2A Built-in voltage detection Built-in current sensor |
| Onboard 4in1 ESC | Power supply: 1S LiPo/LiPo HV Current: 12A continuous peak 15A (3 seconds) Support BLHeliSuite programmable Factory firmware: Z_H_30_REV16_7.HEX Default protocol: DSHOT300 Support Bluejay firmware |
| Onboard SPI ExpressLRS 2.4GHz Receiver
( 2.4G ELRS Receiver Version) |
Packet Rate option: 50Hz/150Hz/250Hz/500Hz ExpressLRS Firmware version: V3.0 RF Frequency: 2.4GHz Antenna: SMD antenna Telemetry output Power: <12dBm Receiver protocol: SPI ExpressLRS Compatible with ExpressLRS V2.0 TX Module Couldn't flash separately ExpressLRS firmware |
| Onboard Frsky SPI D8/D16 receiver compatible
( Compatible Frsky Receiver Version) |
SPI BUS receiver Frsky D8 compatible Compatible Non-EU transmitter D8 model Channels: 8ch No ground interference ( Transmitter and receiver 1 m from the ground): 200meter Failsafe support |
| Onboard Flysky SPI receiver compatible
( Compatible Flysky Receiver Version) |
SPI BUS receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 200meter Failsafe support |
| PNP Version (without onboard receiver) | Full UART1 for external Receiver Support CRSF/GHOST/SBUS/IBUS/DSMX protocol IR1 pad(invert RX1) used for SBUS input |
| Onboard 5.8g OPENVTX | Firmware version: OPENVTX Smart audio v2.1 PIT Mode support RCE Mode support Channels:48ch Transmitting Power: 0/RCE/25mw/100mw/400mw Power supply: DC 5V Current (5v): <650ma (400mw) |
| Runcam Nano3 | Model: RunCam Nano 3 Image Sensor: 1/3" CMOS Horizontal Resolution: 800TVL Lens : 2.1mm(M8) FOV 150° Signal System: NTSC S/N Ratio: >50dB Electronic Shutter Speed: Auto Auto Gain Control (AGC): Auto Min. Illumination: [email protected] D-WDR: Auto Day/Night: Color Power:DC 3-5.5V Current: 110mA@5V [email protected] Housing Material: ABS Net Weight: 1.2g Dimensions: L14mm*W14mm*H9mm |
| Recommend 1S Lipo Battery (Not included)
|
Capacity: 650mAh Voltage: 3.8v Continuous Discharge Rate: 30C Instantaneous discharge rate: 60C Size: 60mmx18mmx8mm Weight: 16g Connector: PH2.0 |
Included
- 1x Mobula7 1S FPV Racing Drone
- 1x Propeller disassemble Tool
- 1x Extra Canopy
- 1x Parallel charging board
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 1060 reviews
Sort
Product Reviews
★★★★★ 4
Great way to keep your PC off the floor, especially with a standing desk
This mount is a great solution if you want to get your desktop tower off the floor and clean up the space around your desk. The construction feels very solid and once installed it holds the PC securely without any wobble. I like that the frame is adjustable so it can fit different case sizes, and the open design allows for good airflow while still supporting the case well.
It is especially helpful if you have a standing desk. Keeping the tower mounted under the desk means all of the cables move with the desk when it raises or lowers, which makes everything much cleaner and easier to manage. Installation takes a little planning to line things up correctly, but once it is mounted it feels very secure. If you want a cleaner workspace and a better setup for a standing desk, this mount works really well.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 14, 2026
★★★★★ 5
Built Like a Tank… Maybe Too Big
This thing is solid. The build quality is exactly what you want when you’re hanging a PC under a desk—sturdy steel, secure mounting, and plenty of adjustability to fit larger cases. It definitely does its job of getting your tower off the floor and out of the way.
That said, size matters here—and this is built for big cases. If your setup is more compact, it is overkill. Definitely measure before you commit, because while the adjustability is nice, it’s clearly designed with larger towers in mind.
Pros:
Very sturdy, confidence-inspiring build
Adjustable to fit a wide range of larger PC cases
Keeps PC off the floor (less dust, more space)
Can mount under desk or on wall
Cons:
Oversized for smaller or mid-sized builds
Requires careful measuring before install
Bulkier than some alternative mounts
Bottom Line:
A heavy-duty mount that does exactly what it promises—just make sure your PC actually needs something this big before you commit.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 5, 2026
★★★★★ 5
My god
Build Quality
The steel construction is very solid and feels durable enough to support a desktop tower or similar device. The powder-coated finish also helps protect against scratches.
Comfort / Ergonomics
Mounting a PC under the desk helps free up floor space and improves overall desk organization. It also keeps the computer elevated away from dust and improves airflow.
Features
The adjustable frame allows it to fit a variety of PC sizes, which makes it versatile. The mounting brackets feel strong and secure once installed.
Ease of Use / Installation
Installation requires basic tools but is fairly simple. Once mounted, the adjustable brackets make it easy to secure the computer in place.
Cleaning / Maintenance
Keeping the PC off the floor makes cleaning around your desk easier and helps reduce dust buildup in the computer itself.
Overall Impression
This mount is a great solution for anyone wanting a cleaner desk setup. It’s sturdy, adjustable, and keeps your computer safely mounted under the desk. Excellent for improving workspace organization.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 13, 2026
★★★★★ 5
Rock Solid and Computer / Wall Safe! Last PC Mount you'll ever need.
This is the hardware that you want in your office: robust, no-nonsense, and able to boss you around its workload. I installed a full size PC case/server in it, and it is rock solid once you lock it in. The open-frame design also merits a mention here as it greatly improves airflow and allows you to access ports on the motherboards and other hardware on your rig should you want to during your gaming sessions without bringing too much heat inside and causing headaches. The width of the holder can be adjusted (approximately 7.7” through 11.8”) in width and (approximately 20” through 25.8”) in height so it fits a large variety of towers, so you don't have to worry whether it could fit your set-up or not. Smaller towers may have substantially more wiggle room though.
The mount's weight limit is no joke—up to 44 lbs—so you're not sacrificing stability just to save a few bucks. The shells are quite secure, although some people may have wished for a little more tightening bite; they still prevent your equipment from falling off if you accidentally bump on a wall, which is more important than you may think.
A little nitpick: the lower wall-mount bracket could have a couple of extra pilot holes to reduce twisting over time. Not a breaker, just a heads-up for all of you who are looking to the long term. Altogether, it's a reliable, solid fix that is well worth the cost, particularly if you're cramming space and airflow in a tight configuration.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 27, 2025
★★★★★ 4
Best for a large PC case, works on smaller towers with mods
This thing is solid! I strongly recommend setting your tower on it to get a feel for the orientation you want before attaching it to your desk or wall. I had to re-mount mine because I had it positioned too far back to be able to plug cables into the PC tower. When the ad says its for a large PC tower they are not joking. I would consider my PC case to be a fairly average size but the bottom clamp and side arms don't hold my case at all. Theres a z shaped bracket included to attach to the main support and let it contact the desk or wall surface behind it. I used this part to wedge between the bottom clamp snd my PC case to hold it in place. My mount is still very sturdy without that bracket in place. I cheated during install and stacked some books under it to bring it up to the height of the bottom of my desk, made easy work of it. I really want to give it 5 stars but unfortunately the fitment issue leaves me hanging, literally. Maybe I will update my rig and get a larger PC case down the road. What I love about this item is my tower used to be on my desktop. Now its tucked away neatly and I was able to separate my 2 monitors more. Feels like a whole new workspace with less clutter and more table space for projects. Good item.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 4, 2025