Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 9 - Jul 14
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Baneblade Squadron - Solar AuxiliaThe Baneblade is a super heavy tank outtted with a bewildering array of weapons, even for a vehicle of its prodigious size. Each Baneblade serves as a mobile bastion, as well as a symbol of pride to those who march alongside it. The Baneblade hull also serves as the basis for a number of more specialised variants employed by the Solar Auxilia including the Hellhammer, which exchanges the standard Baneblade battlecannon with a Hellhammer cannon that
The Baneblade is a super-heavy tank outfitted with a bewildering array of weapons, even for a vehicle of its prodigious size. Each Baneblade serves as a mobile bastion, as well as a symbol of pride to those who march alongside it. The Baneblade hull also serves as the basis for a number of more specialised variants employed by the Solar Auxilia – including the Hellhammer, which exchanges the standard Baneblade battlecannon with a Hellhammer cannon that sacrifices range for increased destructive capabilities.This multipart plastic kit builds two epic scale Solar Auxilia super-heavy tanks. Each of these massive vehicles bristles with firepower, and can be built with a choice of turret weapons – the Baneblade battlecannon to erase targets at range, or the Hellhammer cannon to deal with bunkers and heavy armour – alongside a co-axial autocannon. They also have a choice of sponson-mounted weapons – paired autocannons, heavy bolters, or heavy flamers. On top of these weapon options, both tanks sport a hull-mounted demolisher cannon and heavy bolter, plus paired lascannon sponsons. The kit includes cosmetic build options for each tank's cupola, allowing you to customise your vehicles with gunners, spotters, closed hatches, and so on.
The set includes:
- 2x Solar Auxilia Super-heavy Tanks, each with the following weapon options:
– 1x turret-mounted Baneblade cannon
– 1x turret-mounted Hellhammer cannon
– 2x sponson-mounted autocannons
– 2x sponson-mounted heavy bolters
– 2x sponson-mounted heavy flamers
- 1x Solar Auxilia Vehicle Transfer Sheet
This kit comprises 106 plastic components and a transfer sheet. These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 2334 reviews
Sort
Product Reviews
★★★★★ 5
1999 BMW 528i Fit and works like Original BMW-Pleasantly Surprised
1999 BMW 528i M52TU Engine. Pleasantly surprised and impressed. Everything fit as it should. Yes, one connector pipe took a bit more pressure to get it to "click" and lock, but it did click and lock..and better tight to insure no vacuum leak. Definitely works well and stopped the vacuum leak that old system had. Would recommend especially since price point might lead one to think that quality is not that good, but I'm glad I didn't spend any more on something else. Highly recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 3, 2025
★★★★★ 5
Test fit to make sure it connects
When I revived it I thought it had looked a little too small until I compared it, I test fitted it and at first I thought it was a tad bit bigger but realized the more I pushed it in the more it went very tight fit and my car is running healthy. Installation is a pain but go to YouTube and search the “” the 50’s kid”” Who has two methods to getting them on, I went the intake removal route to replace additional parts.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 8, 2020
★★★★★ 5
Cheap Replacement
These are an easy replacement for anyone who owns a BMW m52/m54 engine that has PCV issues. My car was burning about 1 quart every 1,000 miles. The parts are direct fit and install fairly easy. If there is resistance, lube the hole or o-ring up with some grease and it will slide in easier. Took me about 2 hours start to finish. My mechanic recommended that I remove the intake manifold to do the job. I don’t see how you could do it without removing the intake manifold.
These parts probably won’t last as long as true BMW parts but on a 20 year old car I don’t see the benefit in using genuine BMW parts. Cheap stuff will suffice; worst case it doesn’t last quite as long.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 6, 2021
★★★★★ 4
NOT TOO HARD TO INSTALL...
This CCV kit seems adequate.
People say that because the hoses supplied with these kits are more brittle than the genuine BMW parts, these are tough to install... But they're really not.
The ends on these hoses SWIVEL and you can sort of eyeball which way you need the fitting to be pointing BEFORE you put them on your manifold... They swivel, but they're tight and it takes a little force to turn them.
ALSO, a little dab of silicone gel or a spray of silicone out of the can, into the fittings on these makes a world of difference when clicking them on...
For the price, I highly recommend the kit.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 14, 2025
★★★★★ 5
Great value
I recently had to replace the starter on my 2001 325i E46 with about 150k miles. While I had the intake off, I figured it would be a good time to replace the CCV because I was unsure if it had ever been done. My old CCV literally fell apart as I removed it, so I'm glad I replaced it.
The new parts were a little tough to put together, but overall came together well enough. A lot can be forgiven for the price. I would recommend assembling the system before installing in your vehicle to get a good sense of how it all goes together and to hopefully loosen up the fittings just a tad before installation. 50skid on youtube has a great DIY for doing this job.
I only finished this job yesterday, but my car has been running great. I can't yet confirm, but this may have solved my running lean problem.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 27, 2023